I have two borons from the initial sale
I try to add these from the App, I get stuck on this screen same as this Boron gets stuck in mobile set up
It spins the first time I say “No” or “Yes” for a few seconds, I hear the device switch modes based on windows new device plugged in, then the buttons do nothing. Repeating the process is always “Paired successfully…Do you want to use this Boron in a mesh network loop”
(the above has no replies from support by the way…)
This is after the mobile app updates the firmware on the device
I try to add the boron through the CLI
Something wrong with the firmware?
I have tried flashing
email@example.com <-- doesn’t even flash, “Unknown module function 2”
firstname.lastname@example.org <- Red SOS, 10 flashes
email@example.com <- Red SOS 10 flashes
bootloader-0.9.0-boron.bin <-- doesn’t even flash, 'Unknown module function 2"
hybrid-0.9.0-boron.bin <- Red SOS, 10 flashes
particle update gets rid of the red SOS flashes, same behavior as beginning
Pretty frustrating from a business R&D point of view…