hi everyone, I see the hardware source code is available, ideally if I want to print the board by myself using an external partner and adding few more sensors, is it possible? do I just need to load the particle firmeware to the board and it will connect to the particle cloud? I just want to unders…

Why not use one of the SMD boards for that, like the P1, or even the P0? Those are made for that exact purpose, and will save you from all the ‘hard’ stuff.

thank you for your prompt response! what do you mean for SMD board? is that also available for electron? I am sorry, but I have no clue on what you are talking about. I am open for anything. Thanks, Angelo

For the Electron not quite yet, but it’s being worked on, and shouldn’t take much longer. Alternatively, you could always mount the Electron with some female headers :slight_smile:

Hi @spall If you want to make and sell your own device that uses the Particle Cloud, then you should be talking to sales folks at Particle. They can you figure out how to provision your devices to work on the Particle Cloud. You can fill out this form here to get started: https://www.particle.i…

awesome! thank you so much to both! the second link gives all the details I was looking for, I will definitely reach out to the sales team. one more question, I see we have all particle products already certified, can I just sell it? if I add more sensors, do I need to re-certiiy the board? thanks i…

As a rule, CE marking and similar apply to an entire product tested while operating as it would be expected to run when deployed. So as soon as you stick a photon/P0 onto a custom board to make a bespoke product you would need to have that product tested, depending on your end user, your volume etc …

Hi @Moors7 , Great news! Do you have any roadmap regarding this module? Months, Years? Thanks

[image] SMT version of the Electron Hardware Hey folks. We’re gearing up for an announcement, which will include design files and an opportunity to pre-order evaluation kits, in June. If you would like to gain early access to the datasheet, please send me a PM and I can h…

thank you all! great news! looking forward to hear something new about this new SMT Electron.

Hardware own design and production

Hardware

Moors7 June 29, 2017, 9:55am 9

Topic		Replies	Views
Can I flash Particle/Electron firmware and libraries to my own custom PCB? Product Creation	3	1411	April 3, 2017
Installing Firmware on custom Electron PCB Firmware	8	2230	January 18, 2017
Particle electron / Boron from development to manufacture "recommendation" General	3	832	February 14, 2019
Custom PCB board Hardware	3	494	December 5, 2021
Particle Device OS Hardware	3	620	December 4, 2018

Hardware own design and production

Related topics