I just received my Spark Core, tried to set it up, and ran into the continuous blinking green LED. I tried to do a factory reset and I also tried clearing the memory, but neither worked. Now all I get is a blinking white LED. If I try to hold the Mode button for 10 seconds (to clear the memory), the LED goes from blinking white to solid white.
I have tried reloading the firmware using dfu-util. The output of which suggests it was successful, but I’m still getting the blinking white LED. I also tried loading the cc3000-patch-programmer. It appeared to load successfully. The LED turned off, but I did not a magenta LED when I pressed the Mode button. I basically get no response unless I either put it back in dfu mode or reset to factory settings, upon which the blinking white LED returns.