I just received by Boron LTE and I’m unable to get it set up. Followed the guide in the mobile app (android) and it gets stuck at the pairing step. The Boron LTE is attached to the antenna, plugged in to USB, and the blue LED indicates “listening mode” while the orange LED is rapidly flashing. After…

[image] paul.io: listening mode flashing yellow Listening Mode would be blinking blue. Blinkin yellow is DFU Mode. [image] paul.io: With Electron I can run dfu-util -l and it detects the device. That is because the libusbK driver was assigned to be applied on Electrons in DFU Mode, b…

[image] saviodomnic: particle flash usb <hbrid bin file> Is this a typo or are you really missing the -- in what should be particle flash --usb <hbrid.bin> -v? (I'd always add the -v switch to get a more verbose output)

Hi Scruff, I was able to flash the bin file… just a typo writing it here on the forum. I used the command as you said particle flash --usb But I was not able to claim or continue the setup with the app on iOS thanks Dom

Place the Boron in Listening Mode (blinking blue) run the command: $ particle serial identify Your device id is 23402384x92380x993js39u93 Your IMEI is 0987654321 Your ICCID is 1234567890 Your system firmware version is 0.8.0-rc.25 Copy the ICCID and go to https://setup.particle.io/ Clic…

Hi Kenneth, I do not get an ICCID. I only get these two lines, C:>particle serial identify Your device id is e00fceXXXXXXXXXXXXXXXXXX Your system firmware version is 0.8.0-rc.25 C:>particle help I do not see the IMEI or ICCID … I am using a non-particle SIM card… 2G/3G is fine for the moment …

I got the ICCID from my SIM card another way. However, trying to activate it using the way you suggested… says it is an Invalid SIM card. It is not a Particle SIM… it is a 3rd party SIM card.

@jensck I’m sure you already know this but my device does indeed pair right up using an IOS device (old ipad). I haven’t seen any info regarding a fix for android based devices yet. I noticed the ios app does things in different order than the android app. Probably doesn’t matter, just odd.

There are two things that may help with Android: Upgrading the device to 0.8.0-rc.26 first will help with pairing issues as well as failures during data communication. This was particularly prevalent with Android 7 devices. Version 2.3.8 of the Android app was just released to the Play store a…

Hi folks, Just received my first Boron and am having the same issue: it’s stuck on pairing step. Using USB and particle identify returns “Could not identify device: No serial port identified”.

You won't be able to particle identify until you've upgraded the device the first time. Follow the instructions here to update the Boron by CLI: [image] [Updated 3/21/19] Gen 3 known issues Particle Updates Updating to the most recent release (v0.9.0) The most recent rel…

Unable to set up Boron LTE

Troubleshooting

rickkas7 December 11, 2018, 4:48pm 55

You cannot activate a 3rd-party SIM card using the mobile apps. You need to follow the instructions in the 3rd-party SIM guide:

https://docs.particle.io/support/particle-devices-faq/electron-3rdparty-sims/

Topic		Replies	Views
Trouble setting up Boron LTE Troubleshooting boron	4	1535	January 31, 2019
Boron can't connect to cloud BLE // NFC boron-3g	47	7534	July 15, 2021
BORON LTE is connected but could not send message Connectivity boron	7	827	November 19, 2021
Boron LTE Stuck Flashing Green Troubleshooting boron	102	12162	September 18, 2019
Problem to pair boron Device OS boron	8	1279	December 14, 2022

Unable to set up Boron LTE

Related topics