Are there any available or planned? Perhaps somebody could generate ones from Eagle files? I was trying to use http://eagleup.wordpress.com/ to generate it, but I have no some 3d models for components and other components were exported about 100x times bigger than expected. P.S. Many thanks to ori…

Unfortunately I can’t upload an image here (error occurs…) so you can get the exact 3D model from here . Hope it helps :wink:

Just checked that out on my 3DTV dominikkv, it’s like I was holding it in my hand :smile: PS: Relax @ryotsuke , I’ve found everyone on this forum to be friendly and helpful, including @dominikkv , who’s input on this forum has been very helpful to me and others. It wasn’t off-topic or flooding, it wa…

[image] ryotsuke: P.S. Many thanks to original and very clever comments by dominikkv & dermotos who surely intend to make forum flood/offtopic free Hey @ryotsuke , I think a forum should be a place with a friendly atmosphere where people help each other. As you can see I think I helped many ot…

I’ve managed to create this model http://screenshots.ryotsuke.ru/scr_f9323e04f6ac.png http://screenshots.ryotsuke.ru/scr_c17a5631657f.png but this heavily lacks 3d models for components Missing packages: AT8010 TACTILE_SWITCH_SMD SOD-323 1X12 0603 P-LCC-4-3 SOT363 EXB38V SPARK_LOGO2 CC300…

Those are great pictures of a 3D model. Is there any way you could post the original source file or a 3d format? Perhaps on github or maybe just place it as an STL on thingiverse? Thanks!

One of the Spark guys are working on a Sketchup model. Check @BDub ’s Fritzing thread. If the Spark guy doesn’t have time I’ll make one up using @BDub ’s SVG as a texture. I can provide a version for Altium, Kicad and DipTrace. :smiley:

SparkCore01.skp - https://drive.google.com/file/d/0B5CB6lYHiJRxNWFMdGRMQ1JoRVE/edit?usp=sharing Sketchup model with many components missing

FYI, my SVG texture was created by tracing the Assembly Top view of the PCB… it’s by no means “exact dimensions” but the pins should definitely be on a 0.1" grid. Best bet might be to get the X,Y dimensions of the pcb outline, and go from there, adding components per their x,y data as well.

[image] [image] I’ve experimented a bit and has done this one. I still have no models of all required componets, so I took ones having same amount of pins or least looking alike (I couldn’t find anything even close to CC3000 and 48 pins chip) This model can’t be treated as exact copy, but can be …

Is the pin spacing and board size exact? If so that would be good enough for a DipTrace/Kicad/Altium model! For EDA software I just need the right pin spacing, the components themselves don’t need to be exact. :dragon:

3D models with exact dimensions

Hardware

ryotsuke February 8, 2014, 7:00pm 17

04 is my final version, I do not plan to modify it further due lack of required models

Topic		Replies	Views
Spark module 3D model, STEP? Hardware	3	1142	December 27, 2013
Wings3D VRML (.wrl) model of the Spark Core (For KiCAD/Diptrace/etc) General	19	7675	August 23, 2018
DipTrace Pattern + Component + 3D Model General	4	4541	July 9, 2014
3D step file for Electron e-series Hardware	3	1680	July 30, 2019
Has anyone made a list of Particle products available as 3D models? Product Creation	5	2234	December 11, 2019

3D models with exact dimensions

Related topics