Hi I have used the following code with Particle Electron Asset Tracker before. But when compiling for Tracker One i get the following error. When I try with firmware version 3.0 or below, code compiles and flashes, but the event doesn’t get triggered. device firmware 3.2.0 [error]

Have you tried searching the forum for this issue? When you experience an error chances are that someone before you did so too :wink: [image] 1_GPS_FEATURES in AssetTracker library won't compile Tutorials This is the error that breaks the build And here is the culprit …

Thanks for that. I see that it is the exact same error as I got. But I am not clear of the solution. Do I have to edit the cpp file to return true or is there any other thing I have to do? Regards

[image] Priyath: Do I have to edit the cpp file to return true or is there any other thing I have to do? Either you alter a local copy of the library or you go with Rick's suggestion in the post immediately following mine - which was also the solution for that thread :wink: [image] 1_GPS_F…

Neither library can be used on the Tracker One. You should instead start by using the Tracker Edge firmware, which includes all of the libraries you need. Both the Electron AssetTracker and AssetTrackerRK libraries assume the GNSS is connected by serial, and that’s not the case for the Tracker SoM/…

Hi I will use the AssetTrackerrk thanks. But now I can’t do a simple publish :frowning: :frowning: Please see the below images. The publish works during setup and for about two loops. But then it doesn’t work. I cannot see anything wrong in the code as well. Appreciate your help… [1] [2]

The code you pasted is not the same code that is in the event log, because the log shows the event data being “loop” not an incrementing counter. Almost certainly the problem is in how you’re rate limiting. The code above looks correct, though the long variables should be declared unsigned long No…

Thanks @rickkas7 With the publishing, the issue was every time i flash using web IDE, it gets over written by the default firmware. I marked as development device and it is working. Can you help me with the tracker-edge firmware? I downloaded the zip, but don’t know how to flash it to the device.…

Hi @rickkas7 I am happy to say that I have flahed the Tracker One with the trcker-edge firmware. Now I need to publish the coordinates periodically. With the attached code when the tracker is not moving, the callback function is called every one hour and when moving around every 10 minutes. [ima…

You’d want to change these settings via the tracker dashboard (not in code). Console | Getting Started Web-based management for your Particle IoT devices [image]

@ScruffR Thanks! But still the callback function is called in long intervals while moving. I don’t mind long intervals while not moving. But need faster updates when on the move. Below are my settings. Any other advise is much appreciated! (the Tracker belongs to one product. Doesn’t belong to a gr…

Tracker one compile error

Firmware

ScruffR May 16, 2022, 10:43am 2

Have you tried searching the forum for this issue?
When you experience an error chances are that someone before you did so too

Topic		Replies	Views
GPS lat,long for Tracker One Device [SOLVED] Edge Systems tracker	11	1497	November 20, 2020
Asset tracker not working Troubleshooting	7	1418	July 30, 2016
1_GPS_FEATURES in AssetTracker library won't compile Tutorials electron	7	1232	May 17, 2022
Upgrade to AssetTrackerRK 0.1.6 from 0.1.3 --> compile erorrs General	11	1231	June 1, 2020
Tracker One compilation error in Particle Bench Firmware	5	1218	July 9, 2021

Tracker one compile error

Related topics