Hello, I am working on the Particle Desktop IDE with a Photon. When I try to add the RH_RF95 library by Wiliam Espinoza which is included in the Particle libraries, I cannot compile the project. The compiler errors I get imply that I have not added the library. However I have both added and copie…

Thanks RWB!! It worked! I didn’t manage to have a proper communication yet mainly because I have different connections and I used the constructor with the two parameters which uses the interrupt, so perhaps there is a thing. Also I don’t have a small cable for antenna, which I am going to attach r…

I am having problems. I can see some of the messages transmitted, not all, one out of 20-30 messages will be seen in the terminal of the server. However the server has never managed to send back an ACK. Any ideas? I am working with 433 MHz, so I left out the part of the frequency chainging.

My setup was using the 915 Mhz radios, so the frequency is set in the code for 915mhz.

Yes I saw that in the code and removed the two lines.

You can’t remove those lines, you just have to change the frequency to whatever your radios operate at.

RH_RF95 cannot compile

Troubleshooting

RWB October 10, 2017, 10:29pm 2

Here is how I did it: Photon LoRaWAN node?

Topic		Replies	Views
LoRa FANET with RH_RF95.h and RFM95W Libraries	9	1752	April 9, 2020
Particle Photon / Electron + RFN95W Long Range Radio Firmware	64	23652	May 1, 2019
Electron does not respond to Radiohead test sketch Troubleshooting	6	2446	January 12, 2017
Photon nRF24L01 library use PARTICLE-RF24 Libraries	0	3797	March 18, 2016
How to make RFM69 work on Photon? [SOLVED - new library RFM69-Particle] Libraries	110	17498	December 12, 2020

RH_RF95 cannot compile

Related topics