I had a last P1 module, working till today the morning, and i tried to flash again the tinker firmware. Something went wrong, i don’t know and i don’t want to know what, during update and now P1 can’t connect to Wi-Fi, its Wi-Fi is off. If i try DFU, it turns in blinking green (cloud not connected). …

More good news. Using the WEB IDE, i flashed the Tinker application and immediatly P1 turned again in helthy state! It breathes again cyan. Then i tried the Tinker using CLI and it works just fine. Bravo Fotis! :smile: :sweat_smile: :laughing:

It seems like you haven’t got openSSL installed correctly, or it’s not in your PATH. Try double checking that, and give it another shot.

Where is that to check? OK, another one: After DFU completion and fail, P1 blinks green and after a while it breathes green, that shows cloud not connected. The good news is that the WiFi works, i can see P1 listed in associated devices of router.

Open SSL is installed, i can see in programs folder after Node.js

Having it installed does not automatically mean it’s available in your PATH, which is why I’d recommend you to follow the tutorial I’ve linked to above. You might be able to see it, but the command prompt can’t, since it doesn’t know where to look, which is what you’re telling it by adding it to the…

[image] Moors7: Having it installed does not automatically mean it's available in your PATH, which is why I'd recommend you to follow the tutorial I've linked to above. You might be able to see it, but the command prompt can't, since it doesn't know where to look, which is what you're telling it…

This guide explains it in a rather simple way: https://www.howtogeek.com/118594/how-to-edit-your-system-path-for-easy-command-line-access/ , just follow the pictures… Particle is most definitely ready for commercial use, and is already being used as such. Depending on what your needs are, you might …

I don't know the path to DFU. From memory, in the previous CLI installation, under the directory Particle, there was all subdirectories and executable files. Now there are just two with extension .json. What is that again? Microsoft Windows [Έκδοση 6.1.7601] Πνευματικά δικαιώματα (c) 2009 Micr…

Double posting the same issue is not appreciated here [image] CLI doesn't work anymore! Firmware I had installed CLI previous version (it was fully operational) and yesterday during opening it a message that a new version xxxbbbbbrrrrttt (or something) is available, indica…

No problem, here is what CLI states: Microsoft Windows [Έκδοση 6.1.7601] Πνευματικά δικαιώματα (c) 2009 Microsoft Corporation. Με επιφύλαξη κάθε νόμιμου δικαιώματος. C:\Users\FOTIOS>particle identify ! Error loading module 'serialport': Cannot find module 'serialport' Please reinstall the CL…

Particle P1 breathes white... AGAIN!

Troubleshooting

Moors7 December 4, 2017, 9:42pm 4

Have a look over here: Tutorial: Particle-cli on Windows [07 Jun 2015]

Topic		Replies	Views
[SOLVED] Unknown issue with Photon EDIT: Photon cannot connect to cloud Troubleshooting	64	14357	December 6, 2018
CLI doesn't work anymore! Firmware	11	2975	December 5, 2017
Photon flashing cyan with red bursts [SOLVED] Troubleshooting	17	6782	August 30, 2016
Particle and dfu install issues Troubleshooting	17	4323	September 27, 2015
[Particle Official] Windows 10 Full CLI and DFU Setup Tutorials	54	32975	September 12, 2017

Particle P1 breathes white... AGAIN!

Related topics