JTAG/SWD Pogo Pins for B404X Base PCB

[rickkas7]

There is more information in this post:

Pogo pins to connect the JTAG on the SoM?

Hey! On the SoM module there are 4 pads for the JTAG. On the eval board, there are 4 pogo pins that are meant for connection to these pads. I can't find pogo pins that are small enough to work. It would appear that all of mil-max's pins have too large of a footprint to fit on the PCB in the required 2.5mm grid. Thanks!