Hi Everyone, right now im using softAp for my particle photon to setup the wifi configuration it working fine. for now im customizing the code which provided by the particle. right now im facing issue concept: using softAp im changing the wifi creditinals and also i created a text box using html to…

@ScruffR , i got this working thanks for ur guidance

Here I have a post that shows how you'd setup your code to receive url-encoded parameters [image] Photon SoftAP Inputs Troubleshooting This would be one way to add two extra inputs to the index.html (just replace the original with this) const char index_html[] = "<!DOCTY…

thanks for the reply… im using 192.168.0.1 while the photon is in listening mode … to setup wifi configuration using softAp is that possible to store those user entered data to store that data into the variable for future use? while softAp is running in the listening mode thanks

Have you read the thread I linked above? That’s exactly what’s done there.

thanks a lot its working now… thanks a lot :grinning: but still i need to update more for my project, actually those data will be erased after the board reset. as i read in that theard u have mentioned to use EEPROM to save the data permanently. is that any other way to store that data? and anot…

[image] Siva: is that any other way to store that data? EEPROM is the most convenient and works without any extra hardware and even without cloud connection, but you can of course add an SD card, external flash, ... or store the data in the cloud (once connected) and retrieve it from there. …

thanks a lot man :heart_eyes: i didn’t implemented the eeprom yet, after completion of this task i will let u know the status. thanks man

Suddenly one more doubt raised, is that string or char data can able to write directly to the EEPROM address? Or only int and double datas only

You can store strings and even structs in EEPROM via EEPROM.put() and retrieve them via EEPROM.get() - that’s all documented in the link I provided above. However, String objects are a different kind since their string contents is not stored in the object that gets stored but at a dynamic location …

okay thanks, man i will try with my photon and let u know, by the way merry chirstmas :grinning:

I tired with updating the int data into the EEPROM, that time it works fine, but now when im putting the string data the output will be like this ��@� what was an issue? can u explain? thanks

HTTP Get Request from local

Firmware

ScruffR December 23, 2020, 2:13pm 2

Here I have a post that shows how you'd setup your code to receive url-encoded parameters

Topic		Replies	Views
Photon SoftAP Inputs Troubleshooting	45	7954	September 22, 2017
Webpages on Photon / SoftAP Project Share	92	21921	June 5, 2018
Using new SoftAP Http pages to configure other settings General	6	3893	October 4, 2016
Wifi softAp - http setter Firmware	4	2013	March 14, 2016
Photon softAP HTTP Page(No App) General	17	3977	August 31, 2017

HTTP Get Request from local

Related topics