Hi all, i got a problem writing on the EEPROM. EEPROM.write(0, 0); EEPROM.write(1, 0); EEPROM.write(2, 0); Gives me this Error finalcode.cpp: At global scope: finalcode.cpp:9:1: error: 'EEPROM' does not name a type void analogRead(); finalcode.cpp:10:1: error: 'EEPROM' does not name a type …

Hi @dongamelo , Make sure you included the library you're trying to use. :slight_smile: [image] [Submission] Flashee-eeprom library: eeprom storage in external flash Firmware Libraries …

@Dave , @dongamelo is trying to use the built-in EEPROM emulation added a while back. I would need to see finalcode.cpp to see the relevant area but my first guess is that #include “application.h” my be missing.

Thx @Dave , @peekay123 , peekay was right, i wanted to use the built-in EEPROM. Now i know the Problem EEPROM.write(0, 0); // Gives EEPROM.write(1, 0); // us EEPROM.write(2, 0); // Error void setup() { EEPROM.write(0, 0); //Works EEPROM.write(1, 0); EEPROM.write(2, 0); } void loop() {}…

@dongamelo , you were calling EEPROM outside of a function (in this case, setup()) which is not allowed. As soon as you moved the code inside the function, all worked as expected :wink:

EEPROM Write/Read Issue ( 'EEPROM' does not name a type )

Firmware

Dave July 8, 2014, 1:37pm 2

Hi @dongamelo,

Make sure you included the library you're trying to use.

Thanks!
David

Topic		Replies	Views
EEPROM not declared in this scope[SOLVED] Troubleshooting	3	7481	May 14, 2015
Error reading EEPROM Troubleshooting	4	917	January 28, 2019
Can not change EEPROM values Troubleshooting	20	6414	October 10, 2014
Building an app that used to work on a Spark Core Troubleshooting core	9	950	September 19, 2019
Hard fault with EEPROM.get() Firmware	7	2014	February 5, 2017

EEPROM Write/Read Issue ( 'EEPROM' does not name a type )

Related topics