Photon/P1 getting stuck and not reseting

[Rftop]

@gusgonnet

Lastly, @Rftop you always recommend a cheap timer for an external watchdog and I swear I ran a search and could not find the posts.

Here's one of the posts, and @Paul_M links to the datasheet below it.

Help: Boron hardware watchdog unusable - always winds-up stuck in DFU mode - despite documentation's suggestion

@Paul_M, I use Mode 8 [Edit: Mode 7] and connect the Boron to the Normally Closed (NC) pin on the Relay. The Timer Relay Board uses 580 mW when the relay is energized and 150 mW when it’s not. By using Mode 8 [Edit: Mode 7] and the NC output, the Timer Relay spends most of the time in the “lower” power state. The only time the Relay is energized is when the Webhook response hasn’t made it back to the Boron, so the Relay is energized (580 mW) to completely Power Down the Boron for the selec…