DHT22 returns temp = 0, hum = 6553

[funman1]

Update: This is what solved my issue for now

Updated 2.2.0 and now all my DHT Sensors no longer work Just read 0 and 6553 [SOLVED]

OK so I swore I was running 2.1.0 but apparently not. Jumping to any 2.x results in total failure described above except on pin D1 I was able to reflash them to 1.5.1 and then upgrade them to 1.5.2 and everything is back online and working again on all my photon devices. So here’s how I have it resolved for now, for anyone else in the same situation. Pull your photon from service and connect to USB Install Particle CLI, (If you don’t have it already) download 1.5.1 FW here, https://github.…