Hello again! (I really need to stop in here when things are good so I am not just the guy who has problems!!) Right now I am having an issue getting a camera to play nice. I picked up an Arducam IMX519 ( Amazon.com: Arducam for Raspberry Pi Camera 16MP IMX519 Camera Module with 140°(D) Wide Angle M1…

Ditto on both of the challenges above. I tried the ArduCam IMX708 with the ArduCam UC-376 cable, (missed this thread before purchasing) then tried the IMX519 and ran into the auto-focus issue as well. A couple additional things I tried (heavily assisted by Cursor running on Tachyon) I tried to creat…

[image] sbrust: I do see in the driver from our BSP vendor there is some mention of the AK7375 actuator but there is no explicit connection of it in the device tree. Ill ask our vendor if this is intentional or not. @sbrust Hi Scott, It’s been a while since the last update. Do you have any …

We are currently testing a patch for the IMX519. We will provide an update once validation has been completed.

@kmparticle Hi Kent, Thank you for the update.

Well at least I do not feel that stupid anymore after reading this thread. I read the Tachyon promo and bough a RaspiCam with a Gaint Lense and all to simply find out it does not work and is not on the list. So I grabbed what was marked on the list, the IMX519. Thank you guys here in the thread, fo…

Ok, so I got the new version of the Ubuntu 20 Image (172) which to my understanding should have all the needed drivers in it. However the Cam ist still delivering unusable stuff. gst-launch-1.0 -e qtiqmmfsrc camera=0 num-buffers=1 control-mode=3 focus-mode=continuous ! video/x-raw,format=NV12…

[image] Steffen: gst-launch-1.0 -e qtiqmmfsrc camera=0 num-buffers=1 control-mode=3 focus-mode=continuous ! video/x-raw,format=NV12,width=1920,height=1080 ! jpegenc ! filesink location=/home/particle/daylight.jpg Hi Steffen. Could you add --gst-debug=qtiqmmfsrc:LOG to your command a…

[image] kmparticle: --gst-debug=qtiqmmfsrc:LOG Sorry, am not able to attach a file here I guess: root@tachyon-1a838cd9:~# gst-launch-1.0 -e --gst-debug=qtiqmmfsrc:LOG qtiqmmfsrc camera=0 num-buffers=1 control-mode=3 focus-mode=continuous ! video/x-raw,format=NV12,width=1920,height=1080 ! jpeg…

Yeaah - I can’t get the camera to work on the newer 20.04 build! Focus still does not work and the image seems to be always dull so not sure whats going on there! This is my script sofar… I've tried many combinations of options #!/bin/bash # The IMX519 sensor natively supports: # 4656x3496 (16MP…

Camera problems

Tachyon

Steffen September 18, 2025, 7:55am 43

For anyone who landed here, check the “Expected availability of Ubuntu 24 build“ thread. Someone is working on integrating a working driver for the camera.

Topic		Replies	Views
Arducam library! Libraries	52	16190	November 24, 2015
uCAM III-application (including TCP- and HTTP transfer) Firmware electron , photon	101	12586	February 10, 2020
Tachyon wont output video Tachyon	39	821	November 15, 2025
Ubuntu 24.04 on Tachyon - Early Access & Open Development Tachyon	67	2126	December 23, 2025
fingerprint_fps_GT511C3 Troubleshooting	34	5150	April 24, 2018

Camera problems

Related topics