Hello there, So I’m using the Spark.syncTime(); function in my void setup() and I’m running into an issue that I can’t seem to work around. void setup() { Spark.connect(); Spark.syncTime(); Spark.process(); Spark.disconnect(); Time.zone(-5); Serial.begin(115200); } When I flash the core the RTC…

Time Synchronization: Can't Set RTC Time Upon Reboot [SOLVED]

dougal December 15, 2014, 6:52pm 2

There was a similar thread previously. Not sure if any of the suggestions worked, but:

Topic		Replies	Views
[Solved/Fixed] Time.now() in setup() gives bad time after power on Firmware	5	2464	June 13, 2015
Spark Time Library Firmware	19	8265	April 16, 2015
Sparktime example always returns same time Troubleshooting	7	1653	January 21, 2015
Time Synchronisation Accuracy Cloud	10	4077	June 21, 2015
[Solved]Core doesn't get system time Troubleshooting	5	1581	November 21, 2014