Try this code when you finally get your Mesh Argon working with a few Xenons. Just change the number for each Mesh Device. I use 1 for the Argon and comment out the particle.publish line for the Xenons. IMPORTANT: This code has been updated to make the Particle Featherwing Plug and Play Also now i…

Mind telling us what we’re supposed to see/expect (for those who can’t interpret the code quite yet)?

[image] Moors7: Mind telling us what we’re supposed to see/expect (for those who can’t interpret the code quite yet)? Done. With 3 Xenons my Students got 75 meters away from the Argon, inside the school. Each Xenon about 25 meters apart. Should be able to get much more distance apart when e…

I’ve never had any issue adding and removing the Ufl antennas numerous times but I have heard they are only designed for a few connections.

My problem with the code above is that I can set everything to blink at different times (start with the higher number Xenon and connect the other ones), but if any Xenon does a reset then the timing can gets all messed up. The positive is that if a device does any set of blinking other than the dev…

[image] rocksetta: So you can definitely separate a mesh into 2 local meshes that work but don’t talk to each other. That is part of why I really want multiple Argons to be able to be setup to give a mesh some redundancy. Having at least 2 neighbours is what makes a mesh redundant. If you ha…

[image] peekay123: This is the purpose of repeaters in a mesh. Their only purpose is to bridge mesh segments. I agree @peekay123 , what I am saying is that if a repeater dies, how do you know that your local mesh is still one mesh or two separate meshes. P.S. I am just trying politely to get…

[image] rocksetta: P.S. I am just trying politely to get Particle to quickly allow multiple Argons added to a mesh :grinning: Thought as much, though I don't think it quite works that way. Particle is very much aware of the need and desire for HA networks, so there's little to add to that. St…

[image] Moors7: Stability and reliability are at the forefront of priorities right now. Only after those are satisfactory will new features be added. My Xenons at school are stable and reliable (They don't work at all at home) I don't think multiple Argons are a new feature. I think people ar…

Mesh Hello World

General

RWB December 6, 2018, 5:11am 4

Rickkas provide some code below that allows you to plug in a Argon antenna to the BT Ufl connector on the Xenon if you want to try the range with and without a antenna attached.

Topic		Replies	Views
Refund for large pile of Mesh devices Troubleshooting	18	3580	December 13, 2018
High School Robotics Course using the Particle.io Mesh Devices Blog General	145	23355	October 24, 2019
Boron + 5-Xenon Setup Questions General	85	5338	December 22, 2018
Is Particle Mesh ready for Prime Time? BLE // NFC argon , xenon , mesh	9	1956	May 27, 2019
Viability of Mesh based Smart-Home BLE // NFC argon , xenon	10	1469	February 4, 2019

Mesh Hello World

Related topics