I am attempting to build some wireless sensors that use a Mini Pro and nRF24L01 and MPU6050 to send data (position of the MPU6050) back to an Electron that also has a nRF24L01 connected to it to recieve the data. When I use the equivalent code I can receive data to a Mega from my sensor. Using the E…

You are correct, that was super simple! LOL

@RWB So, thanks to you :relieved: I was able to get the library loaded. I also was able to flash the following examples OTA to my Electron rf24_server.pde, rf24_reliable-datagram_server.pde and rf24_reliable_datagram_client.pde. The diagram below shows how I have the radio wired to the Electron. Re…

I have no idea. You have CE PIN as B2 , should that be D2? Post your code so we can see also. I would get the RFM95w radios since the range is SO much better and you have verified code to work with.

Thanks for the reply. I will double check the pin assignment you have suggested. I have been going around in circles for so long with this I dont recall where I came up with B2? LOL I can post the code if you like but I am only using the example codes provided in the RadioHead ff24 folder. Advise i…

Post your code, I have a few nrf24 radios here that I can try to mess with. How far away are you wanting the radios to work? Testing was done on these earlier and indoor range sucked. The RfM95 modules can be bought for $10 each.

Have you tried this yet? [image] Photon nRF24L01 library use PARTICLE-RF24 Libraries Sharing to hopefully save someone else from the troubleshooting I went through. I was trying to used the ported Maniacbug RF24 library with a Photon…and it doesn’t work! (Mistakenly I th…

This is the example server code I tried // rf24_reliable_datagram_server.pde // -*- mode: C++ -*- // Example sketch showing how to create a simple addressed, reliable messaging server // with the RHReliableDatagram class, using the RH_RF24 driver to control a RF24 radio. // It is designed to work w…

I forgot to answer you on the range, I only need in the neighborhood of about 20 feet. What type of range were you successful with? Thanks

Now can you link to or post the Arduino code that does work for you?

The range was only a few hundred feet indoors. If all you need is 20 feet then it should work.

Electron, nRF24L01 and Pro Mini

General

RWB May 20, 2017, 4:16pm 21

Have you tried this yet?

Topic		Replies	Views
[Request - Answered] nRF24L01+ library Libraries	208	34210	May 15, 2017
Particle Photon / Electron + RFN95W Long Range Radio Firmware	64	23615	May 1, 2019
How to make RFM69 work on Photon? [SOLVED - new library RFM69-Particle] Libraries	110	17472	December 12, 2020
RFID Project: Advice needed Hardware	24	3692	September 24, 2018
Photon LoRaWAN node? General	37	8592	August 12, 2019

Electron, nRF24L01 and Pro Mini

Related topics