Hi folks, What the current state for enabling SoftAP for Argon like for the Photon ? https://docs.particle.io/reference/device-os/firmware/#softap-http-pages My use case is : Need to give the possibility for another person to be able to update Wifi credentials or change Wifi SSID without having…

This is what the current best solution is, unless something new has come up recently. [image] New Library Example: Provision Argon WiFi Credentials via BLE Connectivity Hello Particle Community! I’m Dan Kouba, a Sr. Solutions Architect on the Particle team, and I’m excite…

Salut Steeves, also good to have in mind is this potential inconvenience of the library: [image] Provision Argon WiFi Credentials via BLE question Libraries melt777, The library is only intended to work in non-listening modes, which your testing confirms is true. It shou…

Hey I just read this information about need to be connected and is not working in listening mode :frowning: I contacted the Particle support few days agos and I can’t receive a good answer and for this reason I start this thread. I want to ear about others peoples like me how you deal with the Wif…

Provision Argon WiFi Credentials via BLE question It should only work when the Argon is connecting I think that could be key: when connecting... so if the Argon was connected to a wifi router at some point and this router changed config, the device will be in connecting mode. Hence, this can…

oh oh, I just read this from @melt777 : Dan, I have tried with other devices and the results are the same. The library only works if the Argon is connected to a Wifi already (pulsing Cyan). I will play around a bit on my side but wont get my hopes up. This would be a game changer should we be able…

Hey guys, great discussion here. Just wanted to chime in and add my notes: Since the library runs in the user loop, and requires setup() to be run beforehand, it falls under the same restrictions that any user code does. If you are using your Argon in Automatic mode, the user loop won’t run until t…

[image] Dan-Kouba: If you are using your Argon in Automatic mode, the user loop won’t run until the device is connected Thank you Dan for chipping in. From what you say above, this could work if we set our device in Automatic mode and we enable the system thread with: SYSTEM_THREAD(ENABLED…

Yes, absolutely use SYSTEM_THREAD(ENABLED) instead of MANUAL mode. No good ever comes from using MANUAL mode.

@Dan-Kouba Here is my test about your library and btw thanks in advance. I erased all Wifi credentials on my Argon I created a dummy firmware using exaclty your code file “automatic_mode_example.ino” and flashed Using your page Web BLE Argon Setup Example I was able to find my Argon using my Andr…

[image] steeves: From my Unify salut Steeves, Is Unify your router? [image] steeves: By this test I wanted to simulate when a Wifi networks is lost, not available or password changed. What would happen if, during the test you described above, you create a hotspot on your phone with …

Current state for Argon SoftAP?

Firmware

gusgonnet March 30, 2022, 1:53am 14

For future visitors:

Topic		Replies	Views
Provision Argon WiFi Credentials via BLE question Libraries	14	1396	August 22, 2021
SoftAP on Argon? BLE // NFC	28	4488	March 30, 2022
New Android App: Provision Argon Wi-Fi Credentials via BLE Connectivity argon	4	1273	April 1, 2022
Argon WiFi Provisioning without Particle App Getting Started argon	12	2562	December 21, 2022
Product using Argon: how can a customer claim the device? Firmware argon	6	2021	May 25, 2020

Current state for Argon SoftAP?

Related topics