# WebHook firing more than once

**URL:** <https://community.particle.io/t/webhook-firing-more-than-once/58872>\
**Category:** Firmware\
**Created:** [December 23, 2020, 9:10pm UTC](https://community.particle.io/t/webhook-firing-more-than-once/58872 "2020-12-23T21:10:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![yuanming](https://avatars.discourse-cdn.com/v4/letter/y/a698b9/32.png) [@yuanming](https://community.particle.io/u/yuanming)\
**Post date:** [December 23, 2020, 9:10pm UTC](https://community.particle.io/t/webhook-firing-more-than-once/58872/1 "2020-12-23T21:10:21Z")

</div>

After setting up webhook, we noticed that a single trigger can often leads to multiple webhook calls, and I am suspecting that it is due to timeouts of the initial webhook calls. Can someone clarify the following questions:

1. How to prevent multiple webhook calls for each trigger?
2. Is it possible to adjust timeout settings for webhook calls?

Thanks for your thoughts in advance!

---

<div class="post-metadata">

**Author:** ![particle7888](https://avatars.discourse-cdn.com/v4/letter/p/858c86/32.png) [@particle7888](https://community.particle.io/u/particle7888)\
**Post date:** [January 17, 2021, 5:24am UTC](https://community.particle.io/t/webhook-firing-more-than-once/58872/2 "2021-01-17T05:24:12Z")

</div>

HI @yuanming  
Could you provide more insights on how you detected there was more than 1 webhook call? What is your use case? Thanks.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/particle/original/3X/6/4/64635adccc35238caa19e9b553ec3e98b163d026.png) [@system](https://community.particle.io/u/system)\
**Post date:** [July 18, 2021, 5:24pm UTC](https://community.particle.io/t/webhook-firing-more-than-once/58872/3 "2021-07-18T17:24:17Z")

</div>

This topic was automatically closed 182 days after the last reply. New replies are no longer allowed.