# Stuck at setup.particle.io

**URL:** <https://community.particle.io/t/stuck-at-setup-particle-io/46338>\
**Category:** BLE // NFC\
**Created:** [December 16, 2018, 3:29pm UTC](https://community.particle.io/t/stuck-at-setup-particle-io/46338 "2018-12-16T15:29:57Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![shichuan](https://avatars.discourse-cdn.com/v4/letter/s/58f4c7/32.png) [@shichuan](https://community.particle.io/u/shichuan)\
**Post date:** [December 16, 2018, 3:29pm UTC](https://community.particle.io/t/stuck-at-setup-particle-io/46338/1 "2018-12-16T15:29:57Z")

</div>

I am trying to setup an Argon, and it is showed as successful in console already (I can ping it, etc). However in this webpage, it is still showing this… (see below image)

I am also following this tutorial page: [https://docs.particle.io/quickstart/argon/](https://docs.particle.io/quickstart/argon/) to setup with the Starter project. I am clueless about electronic, and hope to get some guidance on how to put in the miniboard, transistors, etc.

Thank you…

 ![image](https://us1.discourse-cdn.com/flex026/uploads/particle/original/3X/9/8/9808ac99c58fc600145d34d1728962598c9cd5ac.jpg)

---

<div class="post-metadata">

**Author:** ![ScruffR](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/scruffr/32/6952_2.png) [@ScruffR](https://community.particle.io/u/ScruffR)\
**Post date:** [December 16, 2018, 3:38pm UTC](https://community.particle.io/t/stuck-at-setup-particle-io/46338/2 "2018-12-16T15:38:51Z")

</div>

You can find some basic electronics tutorials here  
[https://docs.particle.io/tutorials/hardware-projects/hardware-examples/argon/](https://docs.particle.io/tutorials/hardware-projects/hardware-examples/argon/)

---

<div class="post-metadata">

**Author:** ![shichuan](https://avatars.discourse-cdn.com/v4/letter/s/58f4c7/32.png) [@shichuan](https://community.particle.io/u/shichuan)\
**Post date:** [December 16, 2018, 3:43pm UTC](https://community.particle.io/t/stuck-at-setup-particle-io/46338/3 "2018-12-16T15:43:45Z")

</div>

Great! Thanks for the link and quick response.

I also did setup from my Android Samsung S9 device. It is already listed under “Your Devices” and I can see it has a “Tinker” on the right side of the list.

---

<div class="post-metadata">

**Author:** ![Moors7](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/moors7/32/588_2.png) [@Moors7](https://community.particle.io/u/Moors7)\
**Post date:** [December 16, 2018, 4:30pm UTC](https://community.particle.io/t/stuck-at-setup-particle-io/46338/4 "2018-12-16T16:30:44Z")

</div>

If it’s already working, I wouldn’t worry too much about that setup page anymore 😉