# SmartBBQ: WiFi controlled 4 probe BBQ controller with blower output

**URL:** <https://community.particle.io/t/smartbbq-wifi-controlled-4-probe-bbq-controller-with-blower-output/4776>\
**Category:** Project Share\
**Created:** [June 2, 2014, 12:12am UTC](https://community.particle.io/t/smartbbq-wifi-controlled-4-probe-bbq-controller-with-blower-output/4776 "2014-06-02T00:12:42Z")\
**Posts on this page:** 1\
**Showing post:** 49

<div class="post-metadata">

**Author:** ![marcus](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/marcus/32/1312_2.png) [@marcus](https://community.particle.io/u/marcus)\
**Post date:** [June 25, 2014, 9:00pm UTC](https://community.particle.io/t/smartbbq-wifi-controlled-4-probe-bbq-controller-with-blower-output/4776/49 "2014-06-25T21:00:35Z")

</div>

Hi,  
If you like to use it, here’s some code I use to measure NTC’s very accurately.

[http://pastebin.com/8bxqD8NX](http://pastebin.com/8bxqD8NX)  
[http://pastebin.com/Cf2Qjf8c](http://pastebin.com/Cf2Qjf8c)  
[http://pastebin.com/m17bwXAV](http://pastebin.com/m17bwXAV)

It is portred to the Spark, and it compiles correctly.  
You can uses NUM\_THERMOMETERS to determine how many NTC’s you want to measure.  
I use the code in a project where I control a woodburner that heats my house.  
Enjoy!  
Marcus

---

_[View the full topic](https://community.particle.io/t/smartbbq-wifi-controlled-4-probe-bbq-controller-with-blower-output/4776)._
