# Project guidance

**URL:** <https://community.particle.io/t/project-guidance/45637>\
**Category:** General\
**Created:** [November 27, 2018, 4:14pm UTC](https://community.particle.io/t/project-guidance/45637 "2018-11-27T16:14:29Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![peekay123](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/peekay123/32/810_2.png) [@peekay123](https://community.particle.io/u/peekay123)\
**Post date:** [November 27, 2018, 6:01pm UTC](https://community.particle.io/t/project-guidance/45637/8 "2018-11-27T18:01:59Z")

</div>

@SouthernAtHeart, seems a bit complicated. You may want to look here on how to use IFFFT and Google Home:

> [@Switching 5 relays via Google Home, IFTTT & Particle](https://community.particle.io/t/switching-5-relays-via-google-home-ifttt-particle/44292):
>
> Not sure if this is a good place to ask this but I’ve just got voice command to connect to one or more relays as a revised simple led on/off script. But I want to add a bank of relays via gpio numbers. How to switch individual relays has me stumped within one script. I set up the IFTTT commands and then connect to the script below but want to set up commands for each relay. So typical commnad “Relay 1 on” “Relay 1 off”, etc. How do I do this? I know I need some sort of If then else nesting but…

---

_[View the full topic](https://community.particle.io/t/project-guidance/45637)._