# Particle Serial Monitor - Connected No Output

**URL:** <https://community.particle.io/t/particle-serial-monitor-connected-no-output/54661>\
**Category:** Hardware\
**Tags:** electron\
**Created:** [February 12, 2020, 11:48am UTC](https://community.particle.io/t/particle-serial-monitor-connected-no-output/54661 "2020-02-12T11:48:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jacklaverack](https://avatars.discourse-cdn.com/v4/letter/j/5f8ce5/32.png) [@jacklaverack](https://community.particle.io/u/jacklaverack)\
**Post date:** [February 12, 2020, 11:48am UTC](https://community.particle.io/t/particle-serial-monitor-connected-no-output/54661/1 "2020-02-12T11:48:43Z")

</div>

Hi,  
I recently ran into a problem when running particle serial monitor to see the output from my Electron 3G, I was able to connect successfully but couldn’t see any output.

_FYI, we have multiple E3G running the same firmware that are all functioning as expected_

I’ve reflashed the device and made sure the firmware was installed correctly etc. & then tested with another E3G that I know is currently working, with the device in the exact same scenario I was able to connect to the serial monitor and see the output as expected.

If anyone has any ideas, anything is appreciated.

Thanks

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex026/uploads/particle/original/3X/6/4/64635adccc35238caa19e9b553ec3e98b163d026.png) [@system](https://community.particle.io/u/system)\
**Post date:** [April 12, 2020, 11:53am UTC](https://community.particle.io/t/particle-serial-monitor-connected-no-output/54661/2 "2020-04-12T11:53:49Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.