Particle Device OS Updates Thread

Particle Updates
83

Device OS 1.1.1-rc.1 Release Candidate is out on the Web IDE for (Core/Photon/P1/Electron/Argon/Boron/Xenon/A SoM/B SoM/X SoM)

released on June 14th, 2019

:white_check_mark: This 1.1.1-rc.1 Release Candidate will be defaulted to 1.1.1 on June 28th, 2019 unless there are regressions found that require further patches. :pencil2: Testing on your applications is encouraged and appreciated, thank you! :bowing_man:

:information_source: Note: This is primarily a Manufacturing release for Gen 2 & Gen 3 devices with some minor LTE bugfixes. Your testing is appreciated. If you find any issues, please report them, and fallback to 1.1.0.

Note: This is a Release Candidate (RC) and is not intended for production yet. We've tested this RC to the best of our ability and we want to know what you think now! Please understand that some care and attention is necessary when testing this RC, and be sure to upgrade to the final release when it's available. This RC will not be available by default. To use you must select the version dropdown from the devices drawer. Downgrading back to the current release info is at the bottom of this post.

Note: OTA or YModem transfer on Electron (sequence required)

  1. First Update to 0.5.5 (if the current version is less than that)
  2. Then update to 0.6.4 (if the current version is less than that)
  3. Then update to 0.7.0 (if the current version is less than that)
  4. Then update to 1.1.1-rc.1

Note: DFU over USB on Electron/Photon/P1 (sequence not required)

  • You may update to 1.1.1-rc.1 directly first, flash the system firmware (attached above) in order 1,2(,3) to the device using particle flash --usb <system-part.bin>. See the next note about the bootloader if you are offline!

Note: P1/Photon Bootloader
The Cloud will automatically update the bootloader on P1/Photon devices if your device is online. If your device does not connect to the cloud and it is offline, you should flash the bootloader to the device using particle flash --serial <bootloader.bin>. This should be done after upgrading system firmware. The Electron bootloader is applied automatically from it's own system parts.

Note: Argon/Boron/Xenon/Argon-SoM/Boron-SoM/Xenon-SoM Bootloader
If your device is offline, the bootloader must be manually updated using particle flash --serial <bootloader.bin>. This can be done before or after upgrading system firmware.

Note: Downgrading [Electron/Photon/P1] OTA or YModem transfer:
If you need to downgrade, you must downgrade to 0.7.0 and then 0.6.3(Photon/P1), 0.6.4(Electron) to ensure that the bootloader downgrades automatically. When downgrading to older versions, downgrade to 0.7.0 first, then 0.6.3(Photon/P1), 0.6.4(Electron), then to an older version such as 0.5.5.

1.1.1-rc.1

BUGFIXES

  • [Electron/LTE] disables all eDRX AcT types [ch32051] #1762
  • [LTE] cellular fixes #1824

System Binaries (all devices)

Release v1.1.1-rc.1 (Core/Photon/P1/Electron/Argon/Boron/Xenon/A SoM/B SoM/X SoM) · particle-iot/device-os · GitHub

Programming and Debugging

You can view specific programming and debugging notes for this version of firmware here.

QA Report Summary for Particle Device OS

You can view results of tests run this release here.