# Particle Device OS Updates Thread

**URL:** <https://community.particle.io/t/particle-device-os-updates-thread/14378>\
**Category:** Particle Updates\
**Created:** [August 14, 2015, 12:07am UTC](https://community.particle.io/t/particle-device-os-updates-thread/14378 "2015-08-14T00:07:33Z")\
**Posts on this page:** 1\
**Showing post:** 157

<div class="post-metadata">

**Author:** ![avtolstoy](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/avtolstoy/32/8126_2.png) [@avtolstoy](https://community.particle.io/u/avtolstoy)\
**Post date:** [August 16, 2023, 10:22pm UTC](https://community.particle.io/t/particle-device-os-updates-thread/14378/157 "2023-08-16T22:22:43Z")

</div>

## Device OS 5.5.0-rc.1 Release Candidate is available in the [Web IDE](https://build.particle.io), Particle CLI and Workbench for (Argon/Boron/B SoM/B5 SoM/Tracker/Tracker M/E SoM X/M SoM/P2).

_Released on August 16th, 2023_

**Note:** This is a **Release Candidate** and **is not intended for production yet**.

This is a **Release Candidate** on non-LTS feature development branch (5.x). To learn more about our new LTS release line, read our [blog post](https://blog.particle.io/long-term-support-lts-releases-for-device-os-are-now-available/).

You can view information about Device OS versions, upgrades and downgrades [here](https://docs.particle.io/reference/device-os/versions/).

## Gen 3 256KB application binary support

Device OS v3.1.x and further releases bring support for 256KB application binaries to all Gen 3 platforms (at that time: Argon, Boron, B SoM, B5 SoM, Tracker). A few important aspects of this change:

1. Compatibility with 128KB applications built with \< Device OS 3.1 versions is maintained. Devices can still run them even if other parts have been upgraded to Device OS 3.1+.
2. Upgrade process OTA (including product-based upgrades) is transparent.
3. When upgrading locally (using DFU or Serial), make sure to update the bootloader first, as it has some logic managing compatibility between 128KB and 256KB application types. See [this page](https://docs.particle.io/reference/device-os/versions/) on steps how to perform the update.
4. If using standalone Particle CLI installation, make sure it's updated to **\>= 2.12.0** version, which includes support for 256KB applications.

* * *

## 5.5.0-rc.1

### FEATURES

- Asset OTA [#2668](https://github.com/particle-iot/device-os/pull/2668)
- [M SoM] Platform support [#2681](https://github.com/particle-iot/device-os/pull/2681)
- [rtl872x] Experimental WPA3 support [#2673](https://github.com/particle-iot/device-os/pull/2673)
- [WiFi] Hidden SSID support [#2673](https://github.com/particle-iot/device-os/pull/2673)
- [rtl872x] GPIO drive strength configuration support [#2680](https://github.com/particle-iot/device-os/pull/2680)

### ENHANCEMENTS

- [WiFi] WiFI interface power state notifications [#2669](https://github.com/particle-iot/device-os/pull/2669)
- [rtl872x] Improve `SPI1` (P2 / Tracker M) and `SPI` (M SoM) behavior at 50MHz by changing RXD sample delay [#2677](https://github.com/particle-iot/device-os/pull/2677)
- [rtl872x] Improve USB Serial TX performance [#2672](https://github.com/particle-iot/device-os/pull/2672)
- [Cellular] Enables UPSV=1 low power mode for R510 when idle for \>=9.2s [#2674](https://github.com/particle-iot/device-os/pull/2674)
- [rtl872x] Fix logic level overshoot on SPI, I2C, PWM pins [#2680](https://github.com/particle-iot/device-os/pull/2680)
- [rtl872x] Revert the QSPI flash speed to 80MHz [#2684](https://github.com/particle-iot/device-os/pull/2684)

### BUGFIXES

- [rtl872x] Fix incorrect I2C read timeout [#2671](https://github.com/particle-iot/device-os/pull/2671)
- [rtl872x] Do not initialize RTC after waking up from HIBERNATE sleep [#2667](https://github.com/particle-iot/device-os/pull/2667)
- [rtl872x] Disable pull resistors when pin is configure as `OUTPUT` [#2666](https://github.com/particle-iot/device-os/pull/2666)
- [rtl872x] Disable SWDIO/SWDCLK pins when going into sleep [#2666](https://github.com/particle-iot/device-os/pull/2666)
- [rtl872x] Disable brown-out detector [#2679](https://github.com/particle-iot/device-os/pull/2679)
- [rtl872x] Avoid glitch on I2C pins when reconfiguring I2C peripheral [#2682](https://github.com/particle-iot/device-os/pull/2682)

### INTERNAL

- [WiFi] Resolve `wiring/sleep20` test failures [#2669](https://github.com/particle-iot/device-os/pull/2669)
- [nrf52840] Add factory reset test (`ota/factory_reset`) [#2662](https://github.com/particle-iot/device-os/pull/2662)

* * *

## System Binaries (all devices)

[https://github.com/particle-iot/device-os/releases/download/v5.5.0-rc.1/particle\_device-os@5.5.0-rc.1.zip](https://github.com/particle-iot/device-os/releases/download/v5.5.0-rc.1/particle_device-os@5.5.0-rc.1.zip)

* * *

## Programming and Debugging

You can view specific [programming and debugging notes for this version of firmware here](https://docs.particle.io/reference/device-os/firmware/?fw_ver=5.5.0-rc.1&cli_ver=3.11.3&electron_parts=3#programming-and-debugging-notes).

---

_[View the full topic](https://community.particle.io/t/particle-device-os-updates-thread/14378)._
