# P1 quick cyan and red flash error **URL:** \ **Category:** Troubleshooting\ **Created:** [August 23, 2016, 2:31pm UTC](https://community.particle.io/t/p1-quick-cyan-and-red-flash-error/25300 "2016-08-23T14:31:51Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![particlefan2015](https://avatars.discourse-cdn.com/v4/letter/p/ba8739/32.png) [@particlefan2015](https://community.particle.io/u/particlefan2015)\ **Post date:** [August 23, 2016, 2:31pm UTC](https://community.particle.io/t/p1-quick-cyan-and-red-flash-error/25300/1 "2016-08-23T14:31:51Z")
Hi, I am getting a burst of quick cyan flashes followed by one or two quick red flashes on my P1 and it will not connect to the WiFi. I have previously had this P1 connected to the cloud and working so I am wondering what has happened? I have not changed any code since it was last working. I only have JTAG and WiFi available, not USB. Thanks, ---
**Author:** ![ScruffR](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/scruffr/32/6952_2.png) [@ScruffR](https://community.particle.io/u/ScruffR)\ **Post date:** [August 23, 2016, 5:19pm UTC](https://community.particle.io/t/p1-quick-cyan-and-red-flash-error/25300/2 "2016-08-23T17:19:27Z")
Have you searched the forum for _red burst_? That’s usually in connection with corrupted keys and cured with ```auto particle keys doctor particle keys server ``` * * * Sorry, missed the missing USB bit. That’s something for the hardware guys (@BDub?) ---
**Author:** ![BDub](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/bdub/32/5137_2.png) [@BDub](https://community.particle.io/u/BDub)\ **Post date:** [August 23, 2016, 9:39pm UTC](https://community.particle.io/t/p1-quick-cyan-and-red-flash-error/25300/3 "2016-08-23T21:39:41Z")
@particlefan2015 if you haven’t run ScruffR’s commands yet, would you please backup your P1 image first and send it to me at ![](https://us1.discourse-cdn.com/flex026/uploads/particle/original/2X/9/9b2ca78b50a8aa9e11422ff629557d5ad8eb3950.png) You just need to put the device in DFU mode and run this command (note the replace with device id part of the filename): ```auto dfu-util -d 2b04:d008 -a 0 -s 0x8000000:0x100000 -U p1_backup_replace_with_device_id.bin ``` In your email, please link to this thread so I have a history of things 😄 Thanks! ---
**Author:** ![BDub](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/bdub/32/5137_2.png) [@BDub](https://community.particle.io/u/BDub)\ **Post date:** [August 23, 2016, 9:51pm UTC](https://community.particle.io/t/p1-quick-cyan-and-red-flash-error/25300/4 "2016-08-23T21:51:59Z")
> [@particlefan2015](#): > > I only have JTAG and WiFi available, not USB. Ahh, I missed that part. Well if you have JTAG... you can connect, and read the image out starting at address 0x8000000 with length/size 0x100000 and save as p1\_backup\_replace\_with\_device\_id.bin then please email to me. If you have a server key issue... I'll test a JTAG way of restoring it. ---
**Author:** ![particlefan2015](https://avatars.discourse-cdn.com/v4/letter/p/ba8739/32.png) [@particlefan2015](https://community.particle.io/u/particlefan2015)\ **Post date:** [August 24, 2016, 12:56pm UTC](https://community.particle.io/t/p1-quick-cyan-and-red-flash-error/25300/5 "2016-08-24T12:56:30Z")
I have managed to get the code out as hex, I am not sure if I can get the binary. Is this okay? Also, what is your email address? Thanks! ---
**Author:** ![ScruffR](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/scruffr/32/6952_2.png) [@ScruffR](https://community.particle.io/u/ScruffR)\ **Post date:** [August 24, 2016, 1:04pm UTC](https://community.particle.io/t/p1-quick-cyan-and-red-flash-error/25300/6 "2016-08-24T13:04:40Z")
I’ll PM you his address