# More user application memory needed **URL:** https://community.particle.io/t/more-user-application-memory-needed/27878 **Category:** Firmware **Created:** [December 10, 2016, 3:38pm UTC](https://community.particle.io/t/more-user-application-memory-needed/27878 "2016-12-10T15:38:27Z") **Posts on this page:** 1 **Showing post:** 12
### Author: ![RWB](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/rwb/32/22599_2.png) [@RWB](https://community.particle.io/u/RWB) #### Post date: [December 12, 2016, 3:43am UTC](https://community.particle.io/t/more-user-application-memory-needed/27878/12 "2016-12-12T03:43:49Z")
> [@128K is not enough!](https://community.particle.io/t/128k-is-not-enough/14920/11): > > In a nutshell, if you never plan to update your product over the air and are prepared to always update your application and system firmware via USB, then you can build an application that is 384K in size. Note that this isn’t a supported configuration out of the box, you would need to take several steps to enable this. but it’s technically possible. With that said, have you tried to compile these libraries? I’d also suggest that there are other platforms more suited to running heavier applicati… --- _[View the full topic](https://community.particle.io/t/more-user-application-memory-needed/27878)._