# HTTPS client is here for the Photon! - by the glowfi.sh Team

**URL:** <https://community.particle.io/t/https-client-is-here-for-the-photon-by-the-glowfi-sh-team/15934>\
**Category:** Firmware\
**Created:** [September 24, 2015, 9:13pm UTC](https://community.particle.io/t/https-client-is-here-for-the-photon-by-the-glowfi-sh-team/15934 "2015-09-24T21:13:19Z")\
**Posts on this page:** 1\
**Showing post:** 67

<div class="post-metadata">

**Author:** ![phoenixdigital](https://avatars.discourse-cdn.com/v4/letter/p/9dc877/32.png) [@phoenixdigital](https://community.particle.io/u/phoenixdigital)\
**Post date:** [October 12, 2016, 5:39am UTC](https://community.particle.io/t/https-client-is-here-for-the-photon-by-the-glowfi-sh-team/15934/67 "2016-10-12T05:39:06Z")

</div>

As the IOT grows a solidly performing HTTPS library will be incredibly useful for Particle IO devices.

I am trying to send data from a temperature probe to a Splunk HTTP Event Collector.  
[http://dev.splunk.com/view/event-collector/SP-CAAAE6P](http://dev.splunk.com/view/event-collector/SP-CAAAE6P)

So I can send successfully via http and this works perfectly.  
[http://pastebin.com/HTxBaBp1](http://pastebin.com/HTxBaBp1)

However when I try using the https library nothing comes through on the other end.  
[http://pastebin.com/gbUvyekN](http://pastebin.com/gbUvyekN)

Can anyone see anything obvious in my code above?

Below is the output of the Serial Interface

[[Album] Imgur: The magic of the Internet ![](https://i.imgur.com/A4wc4IU.jpg?fb "Imgur: The magic of the Internet") ](https://imgur.com/a/p0c02)

I think there is definitely an issue with my content length but my C++ is more than 20 years old rusty.

Any advice would be appreciated.

---

_[View the full topic](https://community.particle.io/t/https-client-is-here-for-the-photon-by-the-glowfi-sh-team/15934)._