# High School Robotics Course using the Particle.io Mesh Devices Blog **URL:** \ **Category:** General\ **Created:** [November 29, 2018, 5:05am UTC](https://community.particle.io/t/high-school-robotics-course-using-the-particle-io-mesh-devices-blog/45692 "2018-11-29T05:05:27Z")\ **Posts on this page:** 1\ **Showing post:** 26
**Author:** ![rocksetta](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/rocksetta/32/5099_2.png) [@rocksetta](https://community.particle.io/u/rocksetta)\ **Post date:** [December 11, 2018, 10:44pm UTC](https://community.particle.io/t/high-school-robotics-course-using-the-particle-io-mesh-devices-blog/45692/26 "2018-12-11T22:44:13Z")
Made a new topic here > [@Using Particle Mesh Devices with the OpenThread Border Router](https://community.particle.io/t/using-particle-mesh-devices-with-the-openthread-border-router/46189): > > I am trying to use my Raspberry PI3 and/or Linux laptop as an [Open Thread Border Router](https://openthread.io/guides/border-router), to connect my particle devices together, but the online [examples](https://openthread.io/guides/border-router/raspberry-pi-3b) are all for dev boards. @jberi you seem active on the github site at [https://github.com/openthread/borderrouter](https://github.com/openthread/borderrouter). I have the docker up and running and assume things wont work, but, on the off chance that it is easy to connect an Argon to the Docker container I need a Docker run command that would work for a Particle device. The example [here](https://openthread.io/guides/border-router/docker/run) … --- _[View the full topic](https://community.particle.io/t/high-school-robotics-course-using-the-particle-io-mesh-devices-blog/45692)._