# Got my Boron-LTE, blinking green

**URL:** <https://community.particle.io/t/got-my-boron-lte-blinking-green/45122>\
**Category:** BLE // NFC\
**Created:** [November 9, 2018, 11:03pm UTC](https://community.particle.io/t/got-my-boron-lte-blinking-green/45122 "2018-11-09T23:03:55Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![JeffInCO](https://avatars.discourse-cdn.com/v4/letter/j/f08c70/32.png) [@JeffInCO](https://community.particle.io/u/JeffInCO)\
**Post date:** [November 9, 2018, 11:43pm UTC](https://community.particle.io/t/got-my-boron-lte-blinking-green/45122/3 "2018-11-09T23:43:14Z")

</div>

Now I’m trying to setup the Xenon, and I realized that I think I have not finished setting up the Boron’s mesh network. (The Boron needs to act as the gateway.)

The Xenon sees no mesh network, and when I click on the mesh network setup tab in the particle web console, there are no mesh networks, but there is a message “Create a Mesh Network to connect Mesh devices to each other”, then a “set up a device” button.

Clicking on “set up a device” in the console takes me back to the mesh device setup sequence, which (if executed for the Boron) lands on a “See you back here in a bit!” page where it is waiting for me to finishing setting up from the mobile app. However, setup in the app can no longer communicate with the Boron as a new device – presumably because the Boron is now breathing cyan rather than blinking blue.

In short, I think I’m stuck because the cellular activation took so long (so I left the first pass of the setup sequence in the mobile app).

How can I finish the Boron’s mesh setup (as a gateway), now that it is connected successfully to the particle cloud?

Thanks,

Jeff

---

_[View the full topic](https://community.particle.io/t/got-my-boron-lte-blinking-green/45122)._