# Flashing Cyan on Electron with occasional red **URL:** \ **Category:** Troubleshooting\ **Created:** [August 2, 2016, 2:08pm UTC](https://community.particle.io/t/flashing-cyan-on-electron-with-occasional-red/24795 "2016-08-02T14:08:16Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![sodha.ss](https://avatars.discourse-cdn.com/v4/letter/s/3ab097/32.png) [@sodha.ss](https://community.particle.io/u/sodha.ss)\ **Post date:** [August 2, 2016, 2:08pm UTC](https://community.particle.io/t/flashing-cyan-on-electron-with-occasional-red/24795/1 "2016-08-02T14:08:16Z")
Hey Guys, So I just received the Electron yesterday and I was able to flash my code to it. As soon as I turned it on, I could get the breathing cyan. Today for some reason I turn it on and its flashing cyan forever. Cant seem to breathe and I’m checking the dashboard and it still says there was no connection. It was then able to breathe cyan for a few minutes but then went back to flashing cyan. Anyone have this problem? Thanks ---
**Author:** ![RobMeades](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/robmeades/32/10912_2.png) [@RobMeades](https://community.particle.io/u/RobMeades)\ **Post date:** [August 2, 2016, 2:10pm UTC](https://community.particle.io/t/flashing-cyan-on-electron-with-occasional-red/24795/2 "2016-08-02T14:10:51Z")
Could be this: [Particle API Down?](https://community.particle.io/t/particle-api-down/24790). ---
**Author:** ![rickkas7](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/rickkas7/32/8681_2.png) [@rickkas7](https://community.particle.io/u/rickkas7)\ **Post date:** [August 2, 2016, 2:30pm UTC](https://community.particle.io/t/flashing-cyan-on-electron-with-occasional-red/24795/3 "2016-08-02T14:30:51Z")
Yes, flashing cyan with an occasional red blink on both Electron and Photon is an issue currently being investigated. The discussion is going on in the thread linked to above. ---
**Author:** ![Fragma](https://avatars.discourse-cdn.com/v4/letter/f/5fc32e/32.png) [@Fragma](https://community.particle.io/u/Fragma)\ **Post date:** [August 2, 2016, 8:24pm UTC](https://community.particle.io/t/flashing-cyan-on-electron-with-occasional-red/24795/4 "2016-08-02T20:24:01Z")
That’s what mine is doing, even after it was reported that everything is working. ---
**Author:** ![rickkas7](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/rickkas7/32/8681_2.png) [@rickkas7](https://community.particle.io/u/rickkas7)\ **Post date:** [August 2, 2016, 8:40pm UTC](https://community.particle.io/t/flashing-cyan-on-electron-with-occasional-red/24795/5 "2016-08-02T20:40:13Z")
If you’re still getting red/orange flashes after fast blinking cyan now that the cloud is stable, you might have a keys issue. Put the Electron into Listening mode (blinking blue) by holding down SETUP until it blinks blue. Then issue the CLI command: ```auto particle identify ``` Save the Device ID; you’ll need it later. Put the Electron into DFU mode (blinking yellow) by holding down RESET and MODE. Then release RESET while holding down MODE while it blinks magenta, until it blinks yellow, then release MODE. Then issue the CLI commands: ```auto particle keys doctor particle keys server particle flash --usb tinker ``` ---
**Author:** ![Fragma](https://avatars.discourse-cdn.com/v4/letter/f/5fc32e/32.png) [@Fragma](https://community.particle.io/u/Fragma)\ **Post date:** [August 2, 2016, 9:44pm UTC](https://community.particle.io/t/flashing-cyan-on-electron-with-occasional-red/24795/6 "2016-08-02T21:44:26Z")
Mine is working now but I only made it half way through your instructions. When I was in DFU mode I had to install drivers on my computer and in the process unplugged the cable which power cycled the Photon again, when it came back it connected to the cloud. So entering either listening mode or DFU mode fixed it for me. ---
**Author:** ![SCM](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/scm/32/16789_2.png) [@SCM](https://community.particle.io/u/SCM)\ **Post date:** [March 23, 2017, 8:11pm UTC](https://community.particle.io/t/flashing-cyan-on-electron-with-occasional-red/24795/7 "2017-03-23T20:11:14Z")
I’m having the same issue with a brand new Particle. I should note it is an Africa/Asia/Europe model running 0.4.8. I tried the above with no success, I’ll try updating the firmware. Any other thoughts? ---
**Author:** ![SCM](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/scm/32/16789_2.png) [@SCM](https://community.particle.io/u/SCM)\ **Post date:** [March 23, 2017, 8:18pm UTC](https://community.particle.io/t/flashing-cyan-on-electron-with-occasional-red/24795/8 "2017-03-23T20:18:50Z")
After updating the firmware to 0.6.1, same deal. I’ll also note that I’m in East Africa right now. I get a medium-fast cyan flashing, then really fast cyan blinking, with an occasional 3 fast red blinks thrown in here or there.