# Electron Setup - not breathing cyan

**URL:** <https://community.particle.io/t/electron-setup-not-breathing-cyan/23923>\
**Category:** Troubleshooting\
**Created:** [June 24, 2016, 8:32am UTC](https://community.particle.io/t/electron-setup-not-breathing-cyan/23923 "2016-06-24T08:32:56Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![lei](https://avatars.discourse-cdn.com/v4/letter/l/7feea3/32.png) [@lei](https://community.particle.io/u/lei)\
**Post date:** [June 24, 2016, 8:32am UTC](https://community.particle.io/t/electron-setup-not-breathing-cyan/23923/1 "2016-06-24T08:32:56Z")

</div>

Hi there! I am just setting up and following the steps in the [https://setup.particle.io/](https://setup.particle.io/). I am ready to claim my Electron but it doesn’t seem to settle on breathing cyan.

It just breathes white, blinks fast green, blinks fast cyan for a while, then gets disrupted by a little red + yellow (maybe this is orange) then back to fast cyan, then goes back to the breathing white. It just loops to this sequence.

What I have tried:  
(1) Upgrading the firmware.  
It now says 0.5.1. So I think that’s okay now?

(2) Resolving the the keys. I tried

```
particle keys server

```

and

```
particle keys doctor <device ID>

```

–did nothing. 😟

Not sure if this helps but I can put it to Listening Mode (blinking blue) and DFU Mode (blinking yellow), but not Magenta. It goes to blinking white when I release it at the Magenta color.

I hope someone can help me! Thanks! 😌