# Electron + Asset Tracke + Temperature monitor

**URL:** <https://community.particle.io/t/electron-asset-tracke-temperature-monitor/35045>\
**Category:** Hardware\
**Created:** [August 2, 2017, 11:21am UTC](https://community.particle.io/t/electron-asset-tracke-temperature-monitor/35045 "2017-08-02T11:21:20Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![kecke](https://avatars.discourse-cdn.com/v4/letter/k/b5ac83/32.png) [@kecke](https://community.particle.io/u/kecke)\
**Post date:** [August 2, 2017, 11:21am UTC](https://community.particle.io/t/electron-asset-tracke-temperature-monitor/35045/1 "2017-08-02T11:21:20Z")

</div>

Hello all,

I would like to build a device based on the asset tracker kit to monitor position and temperature in a vehicle.  
I have tried to find out if it is possible to do this as a mobile solution (battery based)  
The idea is to have the device to wake up every 15 minutes and send current position + temperature.

What I am trying to find out is if its possible to do this wit the internal battery included in the kit?  
2000 mah, how long would it last before it need charging?  
I think both the gps and the gsm needs a quite long cycle to find out position, send it and then go to sleep.

Have tried to search the forum without success

---

<div class="post-metadata">

**Author:** ![RWB](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/rwb/32/22599_2.png) [@RWB](https://community.particle.io/u/RWB)\
**Post date:** [August 2, 2017, 1:49pm UTC](https://community.particle.io/t/electron-asset-tracke-temperature-monitor/35045/2 "2017-08-02T13:49:28Z")

</div>

If possible power the Electron off the vehicle battery. If that’s not possible then add a small solar panel to recharge the battery daily. The 2000mah battery will only last so long.

---

<div class="post-metadata">

**Author:** ![kecke](https://avatars.discourse-cdn.com/v4/letter/k/b5ac83/32.png) [@kecke](https://community.particle.io/u/kecke)\
**Post date:** [August 3, 2017, 6:50am UTC](https://community.particle.io/t/electron-asset-tracke-temperature-monitor/35045/3 "2017-08-03T06:50:15Z")

</div>

Hello  
The whole idea is that it should be a mobile solution (to throw in to our subcontractors who we hire in from time to time).  
So making an installation including drilling holes, routing cables etc, i think is not the best solution.

Has there been any tests to see how much consumption it takes to power up antenna + gps, send position and go back to sleep? This will then occur 96 times per day so quite easy to conclude how long a battery will last (and how big battery I must buy)

---

<div class="post-metadata">

**Author:** ![RWB](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/rwb/32/22599_2.png) [@RWB](https://community.particle.io/u/RWB)\
**Post date:** [August 3, 2017, 3:13pm UTC](https://community.particle.io/t/electron-asset-tracke-temperature-monitor/35045/4 "2017-08-03T15:13:14Z")

</div>

Just charge the battery to full and let run until the battery SOC hits 15 to 20 percent.
