# Breathing Cyan then two orange blinks **URL:** \ **Category:** Troubleshooting\ **Created:** [March 17, 2017, 1:45am UTC](https://community.particle.io/t/breathing-cyan-then-two-orange-blinks/30573 "2017-03-17T01:45:37Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![JSchrempp](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/jschrempp/32/6396_2.png) [@JSchrempp](https://community.particle.io/u/JSchrempp)\ **Post date:** [March 17, 2017, 1:45am UTC](https://community.particle.io/t/breathing-cyan-then-two-orange-blinks/30573/1 "2017-03-17T01:45:37Z")
I wanted to share a problem and solution I had. My brand new Photon had been working on another WiFi network. I moved it to a different location, put in in blinking blue mode and used the iPhone program to give it the new WiFi credentials. It seemed to take them, but the iPhone program said the configuration was incomplete. A few reboots of the Photon later it was breathing cyan and showed up as OnLine in the console, and in the iPhone app. However, after a minute or so the Photon would blink orange twice, then go back to rapid cyan flashing. The console showed it OffLine. Sometimes it would go back to breathing cyan itself, other times I would reset it and it would come online. I put it back into blinking blue mode and tried to configure it from the iPhone app again, but the same result. Eventually I put it in blinking blue mode and did `particle setup` on my Mac Laptop. I gave the Photon the WiFi password again and this time it seems to be working without a problem. I don’t know why this happened or why it corrected itself by using the CLI. Perhaps that had nothing to do with it? I write this here for other lost souls to find. Jim ---
**Author:** ![nrobinson2000](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/nrobinson2000/32/15624_2.png) [@nrobinson2000](https://community.particle.io/u/nrobinson2000)\ **Post date:** [March 17, 2017, 2:36am UTC](https://community.particle.io/t/breathing-cyan-then-two-orange-blinks/30573/2 "2017-03-17T02:36:39Z")
> [@JSchrempp](#): > > However, after a minute or so the Photon would blink orange twice, then go back to rapid cyan flashing. That is most likely the issue that has been mentioned multiple times before. > [@Photon keeps blinking cyan with intermittent red blinks](https://community.particle.io/t/photon-keeps-blinking-cyan-with-intermittent-red-blinks/28185/): > > I was experimenting with alternative power sources for my Photon when it suddenly stopped working. It would successfully flash sketches over USB, but when it started up it just blinked green for a second, then cyan and red. I have tried a number of various solutions including resetting Wi-Fi settings and updating keys over DFU to no avail. I fear my Photon may be fried from the voltage put through it, though my multimeter verified that it was 5V. Any help would be appreciated. Here is what the… The typical way to solve this is: ```auto * put device in DFU mode * particle keys server * check to see if your device works, if not, put it back in DFU mode * particle keys doctor ``` ---
**Author:** ![cyclin\_al](https://avatars.discourse-cdn.com/v4/letter/c/b38774/32.png) [@cyclin\_al](https://community.particle.io/u/cyclin_al)\ **Post date:** [March 17, 2017, 2:55am UTC](https://community.particle.io/t/breathing-cyan-then-two-orange-blinks/30573/3 "2017-03-17T02:55:51Z")
Since setting WiFi credentials worked the second time, I wonder if you have a dual band (2.4 GHz & 5 GHz) router with the same SSID on both bands? There is some difference between the bands that is well known to sometimes confuse the Photon and it does not connect. Could this be the case for you? ---
**Author:** ![JSchrempp](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/jschrempp/32/6396_2.png) [@JSchrempp](https://community.particle.io/u/JSchrempp)\ **Post date:** [March 17, 2017, 4:26am UTC](https://community.particle.io/t/breathing-cyan-then-two-orange-blinks/30573/4 "2017-03-17T04:26:20Z")
Good idea, but only a single band WiFi here. I have four other Photons that I bought a year ago and they all work fine. ---
**Author:** ![JSchrempp](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/jschrempp/32/6396_2.png) [@JSchrempp](https://community.particle.io/u/JSchrempp)\ **Post date:** [March 17, 2017, 4:30am UTC](https://community.particle.io/t/breathing-cyan-then-two-orange-blinks/30573/5 "2017-03-17T04:30:03Z")
The two blinks were orange, not red; I’m sure of that. Generating new keys might have been the solution, but since it is working now I’m not going to fool with it. Hopefully this thread mentioning orange will help others to find your link to the blinking red article.