# Argon to Argon Mesh Setup

**URL:** <https://community.particle.io/t/argon-to-argon-mesh-setup/45679>\
**Category:** Troubleshooting\
**Created:** [November 28, 2018, 9:37pm UTC](https://community.particle.io/t/argon-to-argon-mesh-setup/45679 "2018-11-28T21:37:15Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Moors7](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/moors7/32/588_2.png) [@Moors7](https://community.particle.io/u/Moors7)\
**Post date:** [November 28, 2018, 10:13pm UTC](https://community.particle.io/t/argon-to-argon-mesh-setup/45679/3 "2018-11-28T22:13:27Z")

</div>

> [@Allan](#):
>
> When I try to update them the CLI says it was unable to detect any devices in DFU mode.

Have a look over here:

> [@Trouble flashing firmware to Boron over USB](https://community.particle.io/t/trouble-flashing-firmware-to-boron-over-usb/45541/2):
>
> This will occur under Windows. There will be an update to the Particle CLI to fix this soon, however for now: Download and run the Zadig utility: [http://zadig.akeo.ie/](http://zadig.akeo.ie/) Map Boron DFU Mode (also Argon and Xenon) to libusbk: [dfu] Quit Zadig and now DFU should work: dfu-util -l dfu-util 0.8 Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. Copyright 2010-2014 Tormod Volden and Stefan Schmidt This program is Free Software and has ABSOLUTELY NO WARRANTY Please report bugs to …

---

_[View the full topic](https://community.particle.io/t/argon-to-argon-mesh-setup/45679)._