# Argon 0.8.0-rc-25 Issues

**URL:** <https://community.particle.io/t/argon-0-8-0-rc-25-issues/45521>\
**Category:** Firmware\
**Created:** [November 24, 2018, 2:46am UTC](https://community.particle.io/t/argon-0-8-0-rc-25-issues/45521 "2018-11-24T02:46:27Z")\
**Posts on this page:** 1\
**Showing post:** 21

<div class="post-metadata">

**Author:** ![will](https://sea2.discourse-cdn.com/flex026/user_avatar/community.particle.io/will/32/23374_2.png) [@will](https://community.particle.io/u/will)\
**Post date:** [December 13, 2018, 7:24pm UTC](https://community.particle.io/t/argon-0-8-0-rc-25-issues/45521/21 "2018-12-13T19:24:48Z")

</div>

Hey there – wanted to make sure you became aware that `v080-rc.26` has been released and includes potential fixes for the issues described above.

Link to the main updates page with directions for updating can be found here:

> [@\[Updated 3/21/19\] Gen 3 known issues](https://community.particle.io/t/updated-12-12-particle-mesh-known-issues-and-fixes/45722/3):
>
> Updating to the most recent release (v0.9.0) The most recent release for Particle Mesh is v0.9.0. To update your device to this version of firmware, use the following instructions: If you previously tried to set up your device using the Android mobile app and got a Bluetooth (BLE) pairing error (Nexus 6) or an error during device firmware upgrade, you should first manually update the device firmware to 0.9.0 using the Using the Particle CLI instructions below. The BLE fix requires a Particle De…

Hope the update helps to resolve some of your issues. Your feedback on the update would be greatly appreciated!

---

_[View the full topic](https://community.particle.io/t/argon-0-8-0-rc-25-issues/45521)._